UV/LED Safe Base PNB – is a super adhesive thin base that allows you to make a hard coating on normal nails without creating excessive volume.
UV/LED Safe Base PNB has a liquid structure, so it is impossible to overdo it. Our technologists have used a polymer in which Poly-particles guarantee full protection of the nail plate even on damaged nails. And also a safe monomer with a low enough volatility level, which prevents vaporization. It reacts very quickly to UV rays and makes the coating resistant to external damage.
Advantages:
- safe 7-free composition, which is suitable even for allergy sufferers;
- liquid structure lays down a thin layer;
- does not create excessive volume;
- contains unique poly-particles and a monomer with low volatility;
- high level of adhesion;
- does not spread;
- easy application;
- perfectly self-leveling;
- strengthens nails;
- does not injure the nail plate;
- no pungent odor;
- does not chip;
- long wearing time;
- can be used for top-ups.
Warnings and recommendations:
May cause a burning sensation in the lamp when operating at full power. Use half the power of the lamp during the polymerization stage of the base, and ask the client to remove their hand if they feel uncomfortable. Suitable for healthy nails of short length. Do not apply a thick layer.
Application method:
- Prepare the nail plate with a PNB 180 grit buffer or a 240 grit file, removing gloss from the entire surface of the nail.
- Apply auxiliary liquids: Nail Dehydrator PNB and Bond Control PNB on the entire plate.
- Apply a very thin layer of UV/LED Safe Base PNB with rubbing movements, dry for 60 seconds.
- For modeling, apply a second coat, place a drop of UV/LED Safe Base PNB in the apex area and stretch it evenly over the entire surface without turning your finger.
- Dry one finger at a time with a conveyor belt and for a final 1 minute.
- Design/cover with UV/LED Safe Top PNB.
The product is available in a volume of 8 ml.